Evo System Manager

The Evo’s System Manager follows Kensa’s design philosophy of making things easy for installers and end users; an approach that transcends the Evo’s design.

Pioneering Engineering

‘Off-the-shelf’ controllers failed to meet the comprehensive functionality demanded by Kensa’s robust specification, so Kensa designed a bespoke control unit; the first of its kind devoted entirely to controlling a ground source heat pump.

Comprising of a state-of-the-art touch screen display and custom-built control board, Kensa’s exclusive System Manager is the brain of the new Evo Series.

The unique System Manager allows remote monitoring, interrogation and commissioning, as well as a world first live CoP (Coefficient of Performance) readout direct from the operating conditions to ensure the very best efficiency of the Evo ground source heat pump is being achieved.

Exclusive

  • The system is designed for use only in Kensa’s ground source heat pumps and, as such, does not have any confusing or unnecessary features that are not relevant to our products.
  • The control board is a universal controller for all products manufactured by Kensa Heat Pumps.

Easy To Use

  • Comprehensive home screen provides a snapshot of system performance.
  • Live CoP reading displays the real-time system efficiency. Much like the MPG gauge on your car, the Evo delivers data direct from its operating conditions to provide performance transparency and prompt setting adjustments if necessary.
  • System mode icons indicate the heat pump’s operating mode.

Easy Set-up

  • Pluggable and easy to wire connections.
  • Counts three different pulse inputs which can be wired to power a meter, heat meter or water meter.
  • Simple commissioning function tests enable easy system set-up.
  • Adjustable settings enable site and system specific set-up to ensure optimal performance.
  • Live CoP readout and temperature and pressure readings direct from the operating conditions ensure set-up achieves the best system efficiency and heat pump performance is maintained.
  • Diagnostics menu provides live system readings.
  • Access logs of past errors (warning and fault levels) and the history of the heat pump’s performance, providing quick diagnosis and resolution.
  • Password protected access to commissioning and factory setting levels safeguards against accidental system adjustments.

Unique Functions

  • Programmable to control two different heating set points, production of domestic hot water, cooling as well as passive cooling control*.
  • Optional use DHW boost controller synchronised to the heat pump cycles, minimising any additional energy use.
  • Ability to call a hot water tank immersion heater for a period of time after the heat pump has finished its hot water cycle. Designed for instances where the installation demands stored hot water at higher than 60°C or where high system heat losses mean that 60°C hot water is not achievable with the heat pump alone.
*Kensa passive cooling supplementary kit required.
  • Ability to call a hot water tank immersion heater for pasteurisation.
  • Ability to call an external supplementary heat source. Particularly useful in open loop systems when the open loop source gets very cold resulting in the heat pump struggling to reach temperature.
  • Ability to cut out additional heating circulation pumps when the heat pump is in domestic hot water mode.