Menu

Holiday Accommodation

Recommendations

Product range

Kensa Heat Pumps manufactures the largest range of ground source heat pumps for the UK market.

Kensa will work with your preferred plumber or a Kensa Partner Installer to size and install a Kensa ground source heat pump that delivers 100% of your project’s heating and hot water needs.

The recommended Kensa heat pump will depend on your property size and heat demand – the most common Kensa units specified in holiday accommodation are the Shoebox and Evo Series.

contact us web details

Shoebox Heat Pump Series

The award-winning ultra-quiet and ultra-small Shoebox heat pump is designed specifically to be installed inside the property, typically under the kitchen sink or in a utility cupboard, making it ideal for holiday lodges and chalets where space-saving is at a premium.

Available in 3kW and 6kW models.

 

Read more

Evo Heat Pump Series

New for 2017 the Evo is ultra-efficient, enhancing RHI income and further lowering bills. The Evo also features the world’s first control board unique to ground source heat pumps, complete with a touch screen panel for live status reports and easy set-up.

Available in 7kW, 9kW, and 13kW models, the Evo is ideal for larger or older holiday properties.

 

Read more

Use the interactive diagram to discover more about ground source heat pump options for your holiday accommodation.

Ground source heat pumps offer flexible and scalable solutions, extracting the free energy stored underground or in lakes and rivers.  Where properties are close together they can share a ‘ground array’ and ‘heat source’, alternatively single properties can simply have their own.

Hover over the below diagram to learn more:

 

Heat your pool, too!

Does your site have communal washing facilities? Perhaps a swimming pool or a hot tub? A ground source heat pump can provide guaranteed, affordable and sustainable hot water for these, too!

Added benefits

Ground source heat pumps are ideal for holiday accommodation and parks, but if you are still yet to be convinced, let us reassure you on some key points that may concern you:

No damage to the ground

Ground source heat pumps are buried or submerged in water, your guests won’t know they’re there – but they will last there for 100 years!

No disruption

Ground source heat pumps take just 2-3 days to be installed, and can be staggered to suit you.

No income uncertainties

The amount you make through the RHI is based on actual metered heat produced by your ground source heat pump, so if your site requires heat and hot water all year round, you can be sure of a guaranteed RHI income all year round.

The average cost per holiday property is £10,000 – £13,000 – you will get this back typically in just 8 – 10 years through a guaranteed 20 year income for the lifetime of the heat pump.

No saving uncertainties

Ground source heat pumps operate all year round and are meticulously sized to deliver all of your heat and hot water needs, so you can be sure of the system’s performance 365 days a year.

We dig to your tune

We know that for you time is money. And that it is important that your site is not disturbed or disrupted for any lengths of time.

This is why Kensa ground source heat pumps can be installed in just a matter of days, and can be done in stages that suit your schedule.

So your site can be up and running, with renewable heat and hot water, and generating you a guaranteed RHI income, in no time!

How we will support your project

Free site survey

The Kensa technical team will conduct a site survey to assess your requirements in order to provide you with a comprehensive quotation. This involves initial geological surveys, site reviews and financial modelling around typical costs and returns.

Full design package

Including full heat load calculations (to EN12831) and geological reports, for compliance with Microgeneration Certification Scheme (MCS) standards to ensure eligibility for the Non Domestic RHI.

Contract management

Kensa Contracting engages directly with your organisation or main contractor and takes responsibility for the appointment and management of all sub-contractors, including drillers, ground workers, plumbers and electricians.

Where possible we will work with the appointed plumbing and heating contractor to ensure the smooth integration of the heat pump installation and the internal heating systems.

Commissioning and hand over

Kensa Contracting remains involved directly until the project is completed. We also ensure that adequate responsive after sales provision is in place, training your preferred responsive maintenance contractor on the use and potential fault diagnosis of our systems.

RHI applications

Once installation is complete and MCS certified, part of our role is to support you with your application for the Renewable Heat Incentive (RHI) with Ofgem.

Warranty and after sales support

Our technical team remain on hand to support you and your maintenance contractors for as long as you need us.

All Kensa products come with a 5 year warranty for your peace of mind.

Living where we do, surrounded by rolling Welsh hills, we are very conscious that our luxury holiday accommodation should strive towards being eco-friendly. To do this we decided we wanted a heating system that paired technological innovation with natural resources. It is also very important for our guests to be comfortable during their stay with access to a constant supply of heating and hot water.

Mr Phillips, owner of Secret Yurts

Submit details of your holiday park for a detailed quote from Kensa Heat Pumps

Your Details

Your Name* Email* Address 1* Address 2 Postcode*
Company* Region* Telephone*
Your role in the project* Project stage* Project type* Likely start date*
How many lodges shall we quote for?* Size per property (m²)* How many bedrooms per property*

Upload plans: (PNG, JPG, PDF. Max 6MB)

Does your site have access to a water source?*
YesNo Select any additional facilities on your site that require heat* Available ground area (m²)
Current heating fuel? Mains GasElectric StorageLPGOil
What months your park open and close?*
How did you hear about us?* Add any additional comments?
Please tick box to show that you accept the Terms & conditions of our site.
Any information you supply will be held in accordance with the Data Protection Act 2016.

Installer Enquiry Form

This form will be submitted to Installer Directory

To receive a comprehensive quotation from Kensa please provide details of your project in this form. Mandatory fields marked with a * are required for all quotations.


Name*

Company Name (if relevant)

Industry type*

Address (line one)*

Address (line two)*

Region*

Postcode*

Email*

Telephone*

Project name*

Your role in the project*

Project type*

Project stage*

Likelihood of heat pump going ahead*

Likely start date*

How did you hear about us?*

Add any additional notes here

Size your project:*

Property size is required for all quotes. Please select and provide your property size using one (or all) of the following options:

House size (m²): (Unsure? Map yours here & multiply by storeys)

Upload plans:


House type:*

Number of bedrooms:*

Loft and cavity wall insulation installed?*

Property age:*

Heating distribution:*
Underfloor throughoutRadiators throughoutRadiator/underfloor mix

Domestic hot water production:*

Available ground area (m²):

Preferred collector:

Current heating fuel:
Mains GasElectric StorageLPGOil

Ground floor construction:


First floor construction:


Second floor construction:


SAP available:


Information you supply will be held in accordance with the Data Protection Act 2015.


×